---
name: business-card-design
description: Design a business card that's actually laid out like one — the real 3.5 x 2 proportions, the right information in the right places, and cropped to size so it's ready to send to a printer. Load this whenever the owner wants business cards.
version: 1.0.0
metadata: {"bizer":{"name":"Business Card Design"}}
---

BUSINESS CARD DESIGN — a card is not a small flyer. It is one of the most
constrained layouts in graphic design: a person holds it, reads it in two seconds,
and puts it in a wallet. Everything below follows from that.

1) USE THEIR REAL LOGO. Pass includeLogo=true to create_image so the owner's saved
   logo goes on the card, and say where it sits ("the attached logo, top left").
   Without it the model draws a NEW mark from your words — close enough to look
   deliberate, and not theirs. They may not notice until a thousand are printed.
   No logo saved yet? Stop and offer to make one first (Logo Design skill). A card
   built around a placeholder is a card they'll reprint.

2) DESIGN AT CARD PROPORTIONS. A card is 3.5 x 2 inches, landscape (2 x 3.5 for a
   vertical card). Say that in the instruction — the model lays out to what you
   describe. Pass aspectRatio "16:9" for landscape or "9:16" for vertical: the
   closest shapes offered, which keeps the crop in step 4 small.

3) WHAT GOES ON IT, and what doesn't. Front: name, what they do, logo — and let it
   breathe. Back: phone, email, website, service area, hours, or a QR code. Offer
   both sides; that's two create_image calls, includeLogo=true on both.
   Hard rules for the instruction every time:
     - FLAT artwork on a plain background. Not a photo of a card, not an angled
       mockup, no shadow, no hand holding it. Ask for "a business card" without
       saying this and you get a product shot, which is unprintable.
     - Keep every word and the logo well in from the edges — a quarter inch of
       clear space. Whatever crowds an edge gets cut off or cropped away.
     - Phone numbers and emails spelled EXACTLY as given, in quotes in the prompt.
       A wrong digit on a printed card is the most expensive typo in the business.
     - Big enough to read: this is held at arm's length, not viewed full screen.
   ITERATE HERE. This is the step where the design gets redone. If the owner
   doesn't like it — wrong feel, wrong layout, wrong colours, "try it darker",
   "put the logo on the left" — regenerate right here, as many rounds as it takes,
   until they say it's right. Nothing goes to step 4 until they're happy with it.

4) CROP IT TO SIZE. After the design is right, call crop_design with ratio "3.5:2"
   (or "2:3.5" vertical). The generated shape is close but not exact, and this cuts
   it to true card proportions so what the printer receives is what they approved.
   If several versions are on the table, pass the assetId of the one they chose —
   every asset in YOUR BRAND is listed with its id, and with no id the crop lands on
   the most recent image instead of theirs.
   Crop each side. The crop is exact and settled — a known shape in, a known shape
   out, one centred rectangle. THE CROP IS NEVER A REASON TO REDESIGN: it changes
   nothing about the artwork the owner just approved, so don't treat the trim as a
   problem to solve by regenerating. Getting the design safe under the crop is step
   3's job (clear space at the edges).
   The owner is still the boss. If THEY look at the cropped card and want changes,
   that's a normal redesign — go back to step 3, redo it, and crop again.

5) DELIVER A PNG. The cropped design saves to Marketing → Branding, which is where
   the owner downloads it. That's the file printers take. Don't export a PDF unless
   they ask for one.

Then hand off to printing — load the Get It Printed skill for the ordering step.
